Comandos VLAN’s switch cisco

endSW3-AulaInf#enable
SW3-AulaInf#config term
SW3-AulaInf(config)#interface Gi1/0/10
SW3-AulaInf(config-if)#switchport mode access
SW3-AulaInf(config-if)#switchport access vlan 10
SW3-AulaInf(config-if)#end
SW3-AulaInf#copy running-config startup-config
Destination filename [startup-config]?
Building configuration…
[OK]

VLAN AP TRUNKS:
….
switchport mode trunk
switchport trunk native vlan 6
switchport trunk allowed vlan 6-9
end
….